MEP & HVAC

AC Supply & Installation in the Eastern Province

From heat-load calculation and choosing the right capacity to supply, installation, vacuum, trial run and handover.

فريق أعماق الرمال أثناء توريد وتنزيل أجهزة التكييف في الأحساء

In short: We supply and install every type of air conditioner in the Eastern Province: wall split, window, ceiling cassette, floor-standing, concealed ducted, central and package units, and VRF/VRV systems. We start with a heat-load calculation to pick the right capacity, then supply the equipment, install indoor and outdoor units with copper, drain and power, and vacuum and test the circuit before start-up and handover.

The right air conditioner is not chosen on price alone. Too much capacity means short cycling and higher humidity; too little means a unit that runs non-stop and never cools the room. That is why we start with the space, not the unit.

We cover every stage: design and drawings, equipment supply, piping, installation, commissioning, and then maintenance and spare parts.

AC types we supply and install

We help you choose the right type for the space, the use and the budget:

  • Wall split: the most common choice for bedrooms, majlis rooms and apartments.
  • Window unit: an economical, quick-to-install option for existing openings.
  • Ceiling cassette: four-way air distribution for offices, shops and halls.
  • Floor-standing: high capacity for large majlis rooms and halls without ceiling work.
  • Concealed ducted: a unit hidden in the false ceiling with neat diffusers in several rooms.
  • Central, package and VRF/VRV: for large villas, buildings and facilities, with independent zone control.
توريد مكيفات سبليت ودولابي بأنواعها
Split and floor-standing AC units of different types and capacities ready for supply

Which type suits you?

TypeBest forNote
Wall splitBedrooms, majlis rooms, apartmentsBest balance of price and efficiency
WindowRooms with ready openings, small storesQuick and cheaper, but louder
CassetteOffices, shops, hallsNeeds a false ceiling
Floor-standingLarge majlis rooms and hallsHigh capacity in one unit
Concealed ductedVillas and high-end apartmentsPlan it before the gypsum ceiling
Central / VRFLarge villas, buildings, facilitiesNeeds proper design and load calculation

Supply and installation stages

  1. Survey and heat load Area, ceiling height, sun direction, glazing and occupancy.
  2. Equipment and quote Type, capacity, brand, copper lengths and electrical works.
  3. Rough-in Unit positions, wall openings, copper and drain lines.
  4. Indoor unit Mounted perfectly level with the right drain slope.
  5. Outdoor unit On galvanised brackets in a well-ventilated spot.
  6. Vacuum and testing Vacuum the circuit, then leak and pressure test.
  7. Start-up and handover Trial run, cooling measurement and a walkthrough.

Installation standards we keep

Correct installation extends the life of the unit and lowers the power bill, so we focus on the details that are usually skipped:

  • Vacuum the circuit before releasing the refrigerant
  • Copper sized to the unit capacity, fully insulated
  • Correct drain slope to prevent dripping
  • A dedicated breaker and properly sized cable
  • Outdoor unit with enough clearance, out of direct sun where possible
تصميم أنظمة التكييف وحساب الأحمال الحرارية
AC system design and heat-load calculation before supply

What sets the cost of supply and installation?

Our quote prices the unit and the installation separately. The main factors:

FactorEffect
AC type and capacitySplit and window units cost less than cassette, ducted and central systems.
Brand and energy efficiencyMore efficient units cost more to buy and less to run.
Copper lengthsCharged by total length and unit capacity.
Outdoor unit locationHigh roofs and façades need more equipment and time.
Electrical and duct worksNew breakers or a duct network are separate items.

Why ASD for AC supply and installation?

  • One team, start to finish From design to maintenance.
  • Load calculated first So the capacity is right.
  • Insulated American copper Vacuumed and tested.
  • Clear pricing Unit, installation and piping.

Where we install

We serve projects across the Eastern Province – including Al-Ahsa (Al Mubarraz and Al Hofuf), Dammam, Al Khobar, Dhahran, Jubail, Ras Tanura, Abqaiq and Qatif – from our office in Al Mubarraz, Al-Ahsa.

More details: common mistakes, tips and what you get

Common mistakes we avoid

The mistakes we see most often, and how we handle them:

  • Guessing the capacity: an oversized unit raises humidity and wastes power, an undersized one never cools; we calculate the load for every space.
  • Skipping the vacuum: air and moisture in the circuit weaken cooling and harm the compressor.
  • An enclosed outdoor unit: hot air recirculates, temperatures rise and performance drops.
  • A drain without slope: causes drips and stains on walls and ceilings.
  • Weak electrical supply: trips breakers and overheats cables.

Tips before you book

  1. Note the area and ceiling height of each room, and whether it faces the western sun.
  2. Plan AC positions before gypsum and paint so copper and drains can be concealed.
  3. Choose an outdoor-unit spot that is easy to reach for maintenance and cleaning.
  4. Compare quotes on capacity, efficiency and copper lengths – not just the total.
  5. Keep the unit invoice and the dealer warranty details.

What you get

  • New units with the dealer warranty for the chosen brand
  • Complete installation with copper, drain and power
  • Trial run and cooling measurement in front of you
  • A walkthrough of use and routine maintenance

FAQ

Do you supply units or only install?

Both: we supply units in the right brand and capacity, or install a unit you bought yourself.

How do I know the right capacity for my room?

It depends on area, ceiling height, sun direction, glazing and occupancy; we calculate it during the survey and recommend the capacity.

Do you install central and VRF systems?

Yes – central, package and VRF/VRV systems, including design, copper and duct work and commissioning.

Is copper piping priced with installation?

Our proposal lists the unit, installation and copper piping separately, based on lengths and capacity.

Do you relocate air conditioners?

Yes. We remove the unit and reinstall it in the new location, check the refrigerant and run new copper if needed.

Can the AC be roughed-in before finishing?

Yes, and it is the best approach: copper, drains and power go in before plaster and gypsum, and the units are installed after finishing.

How long does a split installation take?

Usually a few hours per unit if the rough-in is ready, longer if new piping is needed.

Start your project or maintenance request today

Call or WhatsApp us directly, or send the request form and we will get back to you quickly.

Company profile

Discover Arabian Sands Depths Foundation's industrial and HVAC services: manpower supply, equipment rental, bolt tightening, MEP, civil and pipeline works, water and waste solutions, serving the oil & gas, petrochemical and power sectors.

PDF file · English