MEP & HVAC

AC Ductwork of Every Type in the Eastern Province

Design, fabrication and installation of duct networks for concealed, central and package AC, with neat diffusers, ventilation and extract.

شبكة دكت تكييف معزولة في السقف

In short: Ductwork is the network that carries cool air from a concealed, central or package unit to the rooms and returns it to the unit. Across the Eastern Province we build every type: insulated galvanised sheet, flexible and pre-insulated panel ducts, with diffusers (linear, square ceiling, side-wall) and return lines, plus ventilation and extract systems.

Concealed AC gives a home a cleaner look and even air distribution, but it only works if the ductwork is designed properly: wrong sizes mean noise and rooms the air never reaches, and poor insulation means condensation and lost cooling.

Duct types and works we carry out

We choose the duct type based on the system, the distances and the ceiling space:

  • Insulated galvanised sheet: the most durable choice for main runs and central systems.
  • Pre-insulated panel duct: light, with excellent insulation – ideal for villas and offices.
  • Insulated flexible duct: for short branch connections to the diffusers.
  • Diffusers: linear slot, square and round ceiling, side-wall and return grilles.
  • Ventilation and extract: bathroom and kitchen extract and fresh air for facilities.
  • Duct cleaning: removing built-up dust from existing networks.
وحدات تكييف VRF خارجية على سطح مبنى
VRF/VRV system with concealed units across the floors of a building

AC systems that use ducts

  • Concealed ducted: a unit in the false ceiling serving one or more rooms.
  • Central and package: a large unit serving a floor or a whole building through a main network.
  • VRF/VRV with concealed units: one outdoor unit for several concealed indoor units.

Ductwork stages

  1. Design and load Air volume per room and duct sizes.
  2. Ceiling coordination With gypsum, lighting and electrical before closing.
  3. Fabrication and installation Fixed on proper hangers with sealed joints.
  4. Insulation and sealing Continuous insulation and joints sealed with duct tape.
  5. Diffusers Fitted after gypsum, with air direction and volume set.
  6. Balancing and start-up Measure and adjust airflow in every room.

Design comes first

We calculate the air volume each room needs and set duct sizes, diffuser and return positions before fabrication, because changing ductwork after the gypsum is closed is costly and disruptive.

We also coordinate with gypsum and lighting so diffusers sit neatly within the interior design, and leave access panels to reach the unit.

  • Air velocities chosen to keep noise down
  • Continuous insulation to stop condensation on ceilings
  • Access panels to reach the unit and filters
مجاري تهوية وشفط في سقف مبنى تجاري
Central AC system connected to a main and branch duct network

What affects the duct cost

We price ductwork after the design and quantity take-off. Cost depends on:

FactorEffect
Duct typeInsulated galvanised costs more than flexible or pre-insulated, depending on the case.
Network length and diffusersMore rooms mean more branches and diffusers.
Diffuser typeLinear diffusers cost more than standard ceiling diffusers.
Ceiling statusWorking before the gypsum is easier and cheaper than after.

Why ASD ductwork?

  • Designed before fabrication With airflow calculated.
  • Every duct type And diffuser.
  • Coordinated with gypsum And lighting.
  • Balanced and commissioned Before handover.

Where we install ductwork

We serve projects across the Eastern Province – including Al-Ahsa (Al Mubarraz and Al Hofuf), Dammam, Al Khobar, Dhahran, Jubail, Ras Tanura, Abqaiq and Qatif – from our office in Al Mubarraz, Al-Ahsa.

More details: common mistakes, tips and what you get

Common mistakes we avoid

The mistakes we see most often, and how we handle them:

  • Undersized ducts: loud noise and weak airflow to distant rooms.
  • No return path: unbalanced pressure and weak cooling.
  • Leaky joints: cool air escapes into the ceiling instead of the rooms.
  • Long, twisted flexible duct: restricts airflow and increases losses.
  • Closing the ceiling without an access panel: any later fault means cutting the gypsum.

Tips before you book

  1. Decide on concealed AC early to set the false-ceiling height.
  2. Choose diffuser positions with your interior designer before the gypsum.
  3. Leave an access panel near every concealed unit.
  4. Ask for air balancing after start-up to confirm even distribution.
  5. Clean the ducts every few years, especially in dusty areas.

What you get

  • An insulated duct network with sealed joints
  • Supply and return diffusers that match the design
  • Access panels for the units
  • Start-up and airflow balancing

FAQ

What is the difference between galvanised and flexible duct?

Galvanised is sturdier and best for main runs; flexible duct is used for short branch connections to the diffusers.

Does ductwork need insulation?

Yes – insulation prevents condensation and cooling loss inside the ceiling.

Can concealed AC be installed after finishing?

It is possible by opening and restoring parts of the gypsum, but it is best planned before the ceilings are built.

Do you install ventilation and extract systems?

Yes – bathroom and kitchen extract and fresh-air systems for facilities, as part of our duct work.

Do you clean existing ducts?

Yes, we clean duct networks and diffusers and remove built-up dust.

Start your project or maintenance request today

Call or WhatsApp us directly, or send the request form and we will get back to you quickly.

Company profile

Discover Arabian Sands Depths Foundation's industrial and HVAC services: manpower supply, equipment rental, bolt tightening, MEP, civil and pipeline works, water and waste solutions, serving the oil & gas, petrochemical and power sectors.

PDF file · English